3.3 Connecting the instrument to a computer
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
16
￭￭￭￭￭￭￭￭
2.945.0010 945 Professional Detector Vario – Conductometry
3.3
Connecting the instrument to a computer
NOTICE
If the instrument is connected to the computer, then it must be
switched off.
Accessories
For this step, you need the following accessories:
￭
USB connecting cable (6.2151.020)
Connecting the USB cable
1
Insert the USB cable into the computer connection socket on the rear
of the instrument labeled
PC
.
2
Insert the other end into a USB port on the computer.
3.4
Connecting the instrument to the power grid
WARNING
Electric shock from electrical potential
Risk of injury by touching live components or through moisture on live
parts.
￭
Never open the housing of the instrument while the power cord is
still connected.
￭
Protect live parts (e.g. power supply unit, power cord, connection
sockets) against moisture.
￭
Unplug the power plug immediately if you suspect that moisture has
gotten inside the instrument.
￭
Only personnel who have been issued Metrohm qualifications may
perform service and repair work on electrical and electronic parts.
Connecting the power cord
Accessories
Power cord with the following specifications:
￭
Length: max. 2 m
￭
Number of cores: 3, with protective conductor
