Metrohm 2.850.9010, Manual

Page: 20 / 28

2.4 Connecting the detector inlet capillary
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
12
￭￭￭￭￭￭￭￭
2.850.9010 IC Conductivity Detector
Connecting detector inlet capillary to MSM / MSM
‑
HC
1 Connecting detector input
￭
Connect the detector inlet capillary (5- 1 ) and the capillary of the
MSM / MSM
‑
HC (5- 2 ) labeled with out to one another using a
6.2744.040 coupling (5- 3 ) and two 6.2744.070 short pressure
screws (5- 4 ) .
1 2 3
4
Figure 5 Connector detector – MSM
1 Detector inlet capillary 2 MSM / MSM
‑
HC outlet capillary
labeled with out .
3 Coupling 6.2744.040 4 Pressure screws, short 6.2744.070
Connecting the detector inlet capillary to the MCS
1 Connecting detector input
￭
Fasten the detector inlet capillary (6- 1 ) using a 6.2744.090 long
PEEK pressure screw (6- 2 ) on the output of the MCS (6- 3 ) .
3 2 1
Figure 6 Connection detector – MCS
1 Detector inlet capillary 2 Pressure screw, long 6.2744.090
3 MCS output