Metrohm 2.850.2230, Manual, Page: 75 / 150

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
850 Professional IC–Anion – MSM-HC – MCS – LP Gradient
￭￭￭￭￭￭￭￭
65
9
3 8 7
3
1
2 3
3 4
5
6
Figure 36 Adsorption cartridge holder
1 PEEK pressure screw, short 6.2744.070 2 Luer coupling 6.2744.120
3 Clips
For fastening the adsorption cartridges.
4 CO
2
adsorption cartridge 6.2837.000
For removing the CO
2
from the aspirated air.
3-layer filled, blue-brown-gray.
5 Adapter 6.1808.190
For connecting the H
2
O adsorption cartridge
and CO
2
adsorption cartridge.
6 PVC tubing
For connecting the H
2
O adsorption cartridge
and CO
2
adsorption cartridge.
7 H
2
O adsorption cartridge 6.2837.010
For removing the H
2
O from the aspirated air.
Filled with bead desiccant.
8 Adsorption cartridge holder
6.2057.080
9 MCS aspirating capillary
Connection to the MCS. Corresponds to
(35-
3
) .
Installing the adsorption cartridges
1 Preparing the adsorption cartridge holder
Push the 4 clips (36- 3 ) into the slot of the adsorption cartridge
holder (36- 8 ) .