91
CLI Commands
Packets Rcv’d –
number of packets received.
Broadcast Packets Rcv’d
–
number of broadcast packets
received.
Multicast Packets Rcv’d
–
number of multicast packets
received.
CRC Alignment Errors
–
number of CRC alignment errors
due to received traffic.
Fragments
–
number of fragments received.
Undersize Packets Rcv’d
–
number of under-sized packets
received.
Oversize Packets Rcv’d
–
number of over-sized packets
received.
Jabbers Rcv’d
–
number of jabbers identified from
received traffic.
Collisions
–
number of collisions encountered during trans-
mission.
Size 64 Packets
– number of packets (64 octets in length)
received.
Size 65 - 127 Packets
–
number of packets (65 to 127
octets in length) received.
Size 128 - 255 Packets
–
number of packets (128 to 255
octets in length) received.
Size 256 - 511 Packets
–
number of packets (256 to 511
octets in length) received.
Size 512 - 1023 Packets
–
number of packets (512 to 1023
octets in length) received.
Size 1024 - 1518 Packets
–
number of packets (1024 to
1518 octets in length) received.
Dropped Events
–
number of events where traffic was
dropped either during reception or transmission.
Example
:
Console> show rmonportstatistics 2
Port: 2
Octets Received: 37706
Packets Rcv’d: 35625
Broadcast Packets Rcv’d: 87
Multicast Packets Rcv’d: 255
CRC Alignment Errors: 0
Fragments Rcv’d: 14
Undersize Packets Rcv’d: 0
Oversize Packets Rcv’d: 0
Jabbers Rcv’d: 0
Collisions: 0
Size 64 Packets: 0
Size 65 - 127 Packets: 0
Size 128 - 255 Packets: 0
Size 256 - 511 Packets: 0
Size 512 - 1023 Packets: 0
Size 1024 - 1518 Packets: 0
Dropped Events: 0
show sensors
Description
: Show all sensor readings for the main circuit board
(module) and the fiber port, and indicate whether the
reading is within range for proper operation. Also indicate
the highest and lowest values at which the component can
operate properly (warning thresholds).
