Radiance T3/E3 Single Interface Line Cards 13
Remote
Device
Receives All 1s
Local Device
Receives
All 1s
Local T3/E3
Card with Fiber
Port Disabled
Remote T3/E3
Fiber Port Detects
No Link
unlit LED
Coax
Coax
Fiber
green LED
LK
LK
LK
LK
All Ones
All Ones
Once a port is disabled, the only way to enable it again is through software.
Through SNMP management, NetBeacon or WebBeacon
*
, you can view the
following information for the Radiance T3/E3 line card.
• Fiber and copper signal status
• Port operational status
• Port loopback mode
• Board serial identification
• FPGA firmware revision
* Refer to the
Command Line Interface Reference Guide, NetBeacon Element Management Software Installation & User’s Guide
or
WebBeacon Management Software Installation & User’s Guide for software management information.
