background image

4

Product Overview

Product Overview

Thank you for choosing the Lancast CenturySwitch.

Designed to meet the needs of today’s growing networks, the Lancast 8-Port
CenturySwitch is a compact, low-cost switch featuring a unique replaceable port
module. The standard unit provides eight auto-negotiating 10/100 TX ports
including one modular port with two connectors to support either a crossover or
parallel connection.

The TX interface may be replaced by an optional 100Base-FX module. METRO-
bility offers FX modules with SC, ST and MT-RJ multimode connectors in
addition to SC singlemode connectors which support network segments up to 15 or
40km. For added versatility, all FX modules include two user-selectable controls to
configure the port’s duplex mode and to set the backpressure/flow control.

By breaking up the collision domain and multiplying network performance, the
Lancast CenturySwitch delivers the ideal solution for easing network congestion
problems on existing shared-hub networks. Use the CenturySwitch to increase
overall network transmission speed and to improve efficiency to accommodate
high-bandwidth applications such as imaging, multimedia and CAD/CAM.

The CenturySwitch includes an universal internal power supply and is perfect for
stand-alone or rackmount use in any office environment.

Key Features

Designed for high-performance, versatility, and cost-effectiveness, the
CenturySwitch offers the following key features:

• Eight 10/100Mbps auto-negotiating RJ-45 ports including one MDI-X/

MDI-II modular port

• Optional multimode or singlemode 100Base-FX interface
• Full/half duplex switch on all FX modules
• Backpressure/flow control for half duplex on optional FX interfaces
• IEEE 802.3x compliant for flow control on all TX ports
• Diagnostic LED indicators
• Store-and-forward switching
• 148,800 packets/sec full-wire rate on 100Mbps mode forwarding and filtering;

14,880 packets/sec full-wire rate on 10Mbps mode forwarding and filtering

• Self-learning capability for up to 8K MAC addresses
• 512KB buffer memory
• Internal universal power supply
• Mountable in a standard 19-inch equipment rack

Summary of Contents for 3508-11 CenturySwitch





















Reviews: