1. If the scooter is equipped with pneumatic tires, proper tire pressure should be ensured before using it.
2. Please check all electric connections and make sure they are well connected and undamaged.
3. Please check all the harness connections and make sure that they are secured properly.
4. Please check the brake system and make sure that they are in good condition.
Load limitation
1. Please refer to the specifications table for weight capacity information. Mobility scooter is limited for
a maximum weight capacity.
2. Stay within the specified weight capacity for your scooter. Overload will make your warranty void
and we will not take responsibility for your injuries or property damage resulting from failures to
observe weight limitation rules.
3. Don't carry passengers on the scooter designed only for one driver. Carrying passengers on the
scooter may result in the change of the gravity center, and finally may causes rollover or tilt.
Tire pressure
1. If your scooter is equipped with pneumatic tires, it is necessary to check the air pressure at least one
time a week.
2. Proper inflation pressures will prolong the life your tires and ensure the smooth operation while
riding.
3. Do not under-inflate or over-inflate your tires. It is critically important that 30-25 psi (2-2.4bar) tire
pressure be maintained in pneumatic tires at all times.
4. Inflating your tires from an unregulated air source could over-inflate them, resulting in a burs tire.
Temperature
1. Some parts of the mobility scooter are susceptible to changes of temperature. The controller can only
operate safely between -25
℃
and 50
℃
.
2. The batteries may freeze at extremely low temperature, and your mobility scooter may not be able to
run at such low temperature. If at extremely high temperatures, it may operate at lower speed due to a
safety feature of the controller that prevents the motor and other electrical components from
damages.
