Program System greetings or announcements
(System Attendant Only)
. Press
TRANS/PGM
button
. Dial [0] Attendant then enter Attendant password i.e. station number *633633
. Dial [6] Record greeting announcement
. Dial [001] for message 01
. Dial [1] for Recording type & listen to system message and current announcement.
. Dial [#] to record new greeting
. Press Hold/Save to store greeting/announcement
Global Station Name Program
(System Attendant Only)
. Press
TRANS/PGM
button
. Dial
0 Enter station password (station number *633633) then dial 7 1
. Enter the station number you are programming
.
Enter in Station name label using number chart on last page
. Press
HOLD/SAVE
button when done
Programming Station Authorisation codes/password- At individual stations
. Press
TRANS/PGM
button
. Dial [3] MSG RET/M-EXT
. Dial [3] USER AUTH REGIST
. Enter the station number then enter password typically
*633633
Program System Speed Dial
(System Attendant Only)
. Press
Trans/PGM
button
. Press
SPEED
button
. Display will show next available speed bin number i.e. (200) system speed bin range (200-999)
. Press
HOLD/SAVE
button (or dial desired speed bin number to edit)
. Prompted to
Enter CO-BTN/DIGIT
. Dial
0
for outside line
. Prompt for
SPEED XXX
where xxx is the speed bin number (2 digit if personal speed dial)
. Enter the phone number you wish to store
. Press
HOLD/SAVE
button
.
Enter in dial by name label using number chart on last page
. Press
HOLD/SAVE
button
. Press
SPEAKER
button to exit
#Note System Speed Dials range from 200~999 and Station Speed Dial range from 00~19
