Metro DataVac GHS1120, Instruction Manual

Page: 16 / 90

- 15 -
GB
Problem
Possible
cause
Solution
The
appliance
leaks water.
Water collection
container or
device for water
evaporation is
damaged.
Have water
collection
container or
device for water
evaporation
repaired by a
professional.
Defrost water
outlet is
blocked or
obstructed.
Remove blockage/
obstruction from
defrost water
outlet.
Appliance
has not been
properly
levelled.
Level appliance
by screwing and
adjusting the
levelling legs.
The
appliance is
abnormally
noisy.
There are loose
screws or bolts
on the frame of
the appliance.
Tighten the screws
and bolts.
Appliance is
not in stable
position or
has not been
properly
levelled.
Bring appliance
into a stable
position or level
it by screwing
and adjusting the
levelling legs.
The
appliance
displays
alarm code
EO.
Technical error
that must only
be handled by
manufacturer
or authorized
representative.
Contact the retailer
from whom you
purchased the
product.
5. Product fiche
Trademark
Model identifier GHS1120 GHS1150
Type of model
Horizontal
Chilled
(Heavy duty)
Horizontal
Chilled
(Heavy duty)
Energy
Consumption
over 24 hours
1.55 kWh/24h 1.55 kWh/24h
Net Volume (V
N
) 40 L 53 L
Climate Class 4 4
Problem
Possible
cause
Solution
The
appliance
does not
operate.
Power plug is
not connected
to an electrical
outlet.
Connect power
plug to electrical
outlet. Plug it in
tightly.
The supply
cord is
damaged.
Have supply cord
replaced by the
manufacturer, its
service agent or
similarly qualified
persons.
On/off switch is
set to OFF.
Set the on/off
switch to ON.
Appliance
does not
achieve the
required
temperature.
Control panel
is not set
correctly.
Set temperature
on control panel as
described in this
manual.
Appliance is in
defrost process
or dripping
phase.
Let defrost process
finish completely
and wait for a
while. Appliance
will take some
time to reach set
temperature again.
Evaporator is
covered with
frost.
Defrost the
appliance.
Condenser is
blocked with
dust.
Clean the
condenser
( After use).
Appliance is
located near
heat sources.
Move appliance
well away from
heat sources.
Air flow of
condenser is
interrupted,
i.e., ventilation
opening is
blocked.
Unblock airflow
of condenser
by removing
obstacles in front
of the ventilation
opening.
Stored foods
or other
objects prevent
a proper
closing of the
appliance.
Reorder contents
of cooling
compartment or
remove several
items to allow
appliance to close.
Appliance is
overloaded,
filled with hot
food or filled
in a way that
prevents proper
air circulation.
Remove several
items from
appliance, remove
hot foodstuffs or
reorder contents of
appliance to allow
air circulation.