Metrix DOX 2 Series, User Manual

Page: 26 / 48

24 Kit Demo for METRIX Oscilloscopes
Demo: with:
DOX2025 DOX2040 DOX2100 DOX2xxx
Test Signal no. 12: Recorder-5 signals
Nature Tracking of 5 slow signals having varied shapes and characteristics
Specs Duration of each signal

1s, amplitude 1.5V < Vpp < 3.5V
Oscilloscope Settings Duration-2s scale - 40µs-MAIN = 500mV/div., DC coupling
Trigger None at first, then threshold(s) on MAIN, level according to signal
Modes "Source/Level" triggering,
Objectives Elementary presentation of the "Scan" mode for the < 50ms/div time base
Attention: the Scan and LongMem modes, along with
the Scan and Delayed modes, are not compatible
Attention: in Scan mode, for the "Level" to be active, the triggering must be in
Normal mode when the Type of Trigger is on "Front"
Observe in Scan mode the signals delivered by the HX0074 demonstrator:
Using triggering on pulse width and acting on the position of the level, it will be possible to trigger on each of the
5 slow signals.
By placing the triggering level close to zero and programming the pulse width, it is possible to synchronize to
the damped sine wave, the low pulse, and the low ramp.