background image

3

Speakers Connection

This unit can mate with 4 as well as 8 speakers .Make sure
Power  is  off  before connecting.

Caution:

Do Not Short speaker wires to chassis ground . It may  cause  severe
damage.

Ground Connection

Connect Black  Wire to Ground  terminal. If not found, connect it to 
the chassis instead.

Power  Connection 

First connect the red  Wire (w/3Amp fuse ACC) to  ignition output.
battery  power. Make sure no other device, such  as switch, in between.
Then  connect orange  Wire(w/1 Amp fuse block) directly  to +12v

Antenna  Connection

Insert coaxial connector  to antenna  socket.

Caution:

        If a fuse  is  blown , only replace  it with one  of  the  sam e  rating.
Other wise  may  cause  severe damage . Repeated  blown fuse indicates
potential problem(s) exists. A  thorough inspection is recommended. 

WIRING  INSTRUCTION

BAND

  REP

  PLAY 

POWER ON/OFF

When is on radio/CDP mode, turn the VOL button clockwise to increase the volume, turn 
anticlockwise to decrease the volume.

VOLUME 

MODE

BUTTON  FUNCTION

6

Press BAND button to switch between FM/AM.

Press DISP button to display time, long press the DISP button to setup the time.  
When the time blinks, press H/M button to set hour/minute; hold H/M to increase H/M 
sequentially.   

  DISP

1) Press DISP to display clock.
Long press DISP to setup the time, while it is blinking, press H/M press to adjust the time. 
It will display the time, if you press DISP button again or left it for 5 seconds .
2) Press “H” once to increase one hour, long press to increase sequentially.
3) Press “M” once to increase one minute, long press to increase sequentially.

  CLOCK 

Press PWR to turn on/off the power.

Press MOD to switch to CD mode.  If no CD inside the cartridge, the LCD shows “__”.  
When you insert a CD into the cartridge, it reads the CD automatically, and displays 
number of tracks on LCD (If a CD is not readable, it displays “E”).

Press PLAY to play first tracks from CD.  While it is playing a track, press PLAY to pause/
resume the track, the word “PLAY” will displays on the screen and blinking. 

STOP

Press STOP to stop playing a track.  

Press REP plays a track repeatedly; long press REP play all tracks repeatedly.

Reviews: