The DSP Toolchest
423
Plug-in version
Delay (samples)
Delay (ms)
7k
7165
162.517
8k
8192
185.737
9k
9216
208.957
10k
10240
232.177
15k
15360
348.277
Table 16.2. External memory delay times
MIO MultiTap Delay
• Synopsis: MultiTap Delay
• Category: Delay, Building Blocks
• Channels: 1
Description:
MIO MultiTap Delay implements a multi-tapped delay line. The total delay line length in this im-
plementation varies; see the table below. Each delay tap is independent from the other taps, and
provides controls to set the tap delay, gain level and polartity invert. Each tap can be enabled and
disabled independently as well.
The delayed signal for each tap is available on dedicated outputs for further processing. The con-
tributions of each tap are also summed together and the summed signal is available on the last
output of the processing block.
The MIO MultiTap Delay is appropriate for creating the initial delays for a reverb algorithm. It can
also be used to create multiple delayed copies of a signal. This second application can be used in
a musical context or could be used to create multiple time-aligned feeds for a distributed sound
reproduction system (e.g. a PA with multiple fill zones).
Parameters:
Enable
{Off, On}
Enable the tap. When enabled, the tap generates output from on its dedicated output port
and contributes to the summed output.
Delay(samp)
[0, 1.023k] samps
Sets the delay, in samples, between the input and output of this tap.
Gain
[-160, 10] dB
Sets the gain of the delayed signal.
Invert
{Off, On}
When enabled, inverts the delayed signal relative to the input polarity.
Enable
{Off, On}
Enable the tap. When enabled, the tap generates output from on its dedicated output port
and contributes to the summed output.
