Metric Halo 3d Upgrade Board Set Page 422 User Manual Download

Page: 422 / 527

The DSP Toolchest

422

Plug-in version

Delay (samples)

Delay (ms)

2048

46.4172

3072

69.6372

4096

92.8571

5120

116.077

6144

46.4172

7165

162.517

8192

185.737

9216

208.957

10k

10240

232.177

15k

15360

348.277

Table 16.1. Internal memory delay times

MIO Delay (2k-15k)

• Synopsis: External Memory Delay

• Category: Delay, Building Blocks

• Channels: 1

Description:

Provides an integer sample delay from the input to the output. Changes in the delay time are

interpolated, allowing you to change the delay time with no glitches. For large changes in the

delay time, the interpolation has the effect of shifting the pitch of the delayed signal as the delay

time is changing.

This version of the delay utilizes the external memory block for the delay buffer. If you get a mes-

sage that MIOConsole3d can't instantiate the plug-in, try using the IM version.

Parameters:

Delay(samp)

[0, See table] samps

Specifies the delay throught the process block in samples.

Delay(ms)

[0, See table] ms

Specifies the delay throught the process block in milliseconds.

Master Bypass

{On, Off}

When engaged sets the delay through the block to 0.

Plug-in version

Delay (samples)

Delay (ms)

2048

46.4172

3072

69.6372

4096

92.8571

5120

116.077

6144

46.4172

Summary of Contents for 3d Upgrade Board Set















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3d Upgrade Board Set

Reviews:

Related manuals for 3d Upgrade Board Set

Brands by name

Popular brands

Metric Halo 3d Upgrade Board Set, User Manual

Search results

Summary of Contents for 3d Upgrade Board Set

Reviews:

Related manuals for 3d Upgrade Board Set

Brands by name

Popular brands