The DSP Toolchest
405
Decode (Constant Power)
Makes input 1 be the Mid Channel and input 2 the Side Channel. In this mode, the proces-
sor decodes the M/S input to Left and Right outputs, keeping the total power constant
(the amplitude increases, and may go over 1). It is possible to clip audio using this setting.
Encode (Constant Amplitude)
Makes input 1 be the Left Channel and input 2 the Right Channel. In this mode, the proces-
sor encodes the Left and Right inputs to M/S outputs, keeping the total amplitude con-
stant. The center point is output compensated to avoid clipping.
Encode (Constant Power)
Makes input 1 be the Left Channel and input 2 the Right Channel. In this mode, the proces-
sor encodes the Left and Right inputs to M/S outputs, keeping the total power constant
(the amplitude increases, and may go over 1). It is possible to clip audio using this setting.
LR->MS->LR
Makes input 1 be the Left Channel and input 2 the Right Channel. In this mode, the proces-
sor encodes the Left and Right inputs to an internal M/S representation, applies the width
and rotation transformations in the M/S representation and then decodes the transformed
M/S channels back to Left and Right outputs.
Width
[0, 1]
Adjusts the width of the transformed field. When this parameter is 0, the ouput will be mono.
When this is 1, the full stereo width is represented.
Rotation
[-180, 180]
°
Rotates the stereo field by the specified angle.
Master Bypass
{On, Off}
Bypasses all of the processing.
MIO M/S Decoder
• Synopsis: Mid/Side Decoder
• Category: Spatial, Building Blocks
• Channels: 2
Description:
M/S Decoder is a Mid/Side Decoder. It can be used to decode material that was previously en-
coded as Mid/Side.
Parameters:
Mid Invert
{Off, On}
When enabled, inverts the 1st input channel before processing.
Side Invert
{Off, On}
When enabled, inverts the 2nd input channel before processing.
