403
16. The DSP Toolchest
DSP Plug-in Documentation
Everything you ever wanted to know about all the weapons in your 3dDSP arsenal.
MIO Volume Control (Linear)
• Synopsis: MIO Volume Control - Linear Interpolation
• Category: Building Blocks
• Channels: 1, 2, 3, 4, 5, 6, 7, 8
Description:
The output of this plugin is the input with the specified gain applied to each input channel. The gain
is specified by the
Volume
parameter in dB. The
Glide
parameter controls how quickly the applied
gain will change when you change the
Volume
parameter. This version of the plugin changes the
gain linearly between the old value and the new value. To change the gain logarithmically, use
the
Parameters:
Volume
[-120, 20] dB
Specifies the gain applied to the input signal.
Glide
[0, 1k]
Specifies the rate at which the gain will change. If the Glide value is close to 0 (especially
between .1 and 1), the gain will change slowly. If Glide is close to 1000, the gain will change
quickly.
Master Bypass
{On, Off}
When bypassed, the gain will be set to 0dB, passing the input signal unchanged.
MIO Volume Control (LPF)
• Synopsis: MIO Volume Control - Low Pass Filtered Interpolation
• Category: Building Blocks
• Channels: 1, 2, 3, 4, 5, 6, 7, 8
Description:
The output of this plugin is the input with the specified gain applied to each input channel. The
gain is specifed by the
Volume
parameter in dB. The
Glide
parameter controls how quickly the
applied gain will change when you change the
Volume
parameter. This version of the plugin uses
a single-pole low pass filter (LPF) to change the gain between the old value and the new value
logarithmically. To change the gain linearly, use the
plug-in.
