The MIOConsole3d Application
216
Session: Waveform Scaling menu
Figure 10.37: Session: Waveform Scaling menu
“Waveform Scaling” provides four relative waveform amplitude scales to better expose peak transients or
to reveal low-level signal detail.
•
Enhance Peaks
exaggerates the amplitude scale to enhance transient peaks - useful for beat location
and time-aligning tracks.
•
Normal
is the standard linear amplitude scale, good for general overview and scales well to small
track heights.
•
Enhance Low Level
is scaled to show low level signals more clearly without completely obscuring
high-amplitude peaks.
•
Extra Enhance Low Level
pushes up the low amplitude level view for tight editing and noise floor
examination.
Session: Looping menu
Figure 10.38: Session: Looping menu
Session provides a number of looping modes for rehearsal, overdubbing and editing. The Session transport
will loop even 192kHz multitracks with zero latency, so no time is lost at loop transitions.
•
Loop Playback
(default:
⌘L
) defaults as ‘enabled’ when opening a new session.
The Session Transport “Loop On/Off” button and the currently looped section of the timeline turn
yellow to indicate that “Loop Playback” mode is engaged.
Looped audio will play continuously unit stopped.
•
Set Loop When Cueing to Mark
(default:
⌥⌘L
)
When selecting a Loop Mark in the Marker List, “Set Loop When Cueing to Mark” will automatically
turn on looped playback for that mark.
•
Set Loop Start to Playhead
(default:
⇧⌘<
) sets the Loop Start cursor to the current playhead position.
