MI 3325 MultiServicerXD
200
Figure E.7: Example of Search result within Auto Sequence
®
group
E.3
Elements of an Auto Sequence
®
end of test flow command by default. Other Flow commands can also be added to the
Measurement step.
Result
The Result step contains the Result screen flow command by default. Other Flow commands
can also be added to the Result step.
E.3.1 Single tests
Single tests are the same as in Metrel ES Manager Measurement menu.
Limits and parameters of the measurements can be set. Results and sub-
results can’t be set.
E.3.2 Flow commands
Flow commands are used to control flow of the measurements. Refer to chapter
for more information.
E.3.3 Number of measurement steps
Often the same measurement step has to be performed on multiple points on the device under
test. It is possible to set how many times a Measurement step will be repeated. All carried out
