MD 9930 Thermal camera
Safety
6
Do not remove the battery while the thermal camera is working. It may cause the
thermal camera to work abnormally.
Do not disassemble or modify the battery.
The battery case contains safety and protection devices for the battery. If they
become damaged it can cause the battery to heat up and explode or catch fire.
If a leak from the battery occurs and the fluid gets into contact with the eyes, flush
them well with water and immediately seek medical care. Avoid rubbing the eyes to
prevent further injury.
Do not make holes in the battery housing or expose it to high pressure, shock or
impact force.
Keep battery at ambient temperatures below 50°C. Avoid locations near heating
bodies, fire or in direct sunlight. Do not use soldering iron or similar tools on the
battery or its housing.
Always charge the battery in the specified temperature range 0°C to +50°C. Charging
it outside this range can cause it to heat up, lowers its life span, permanently
decreases performance or breaks it.
Prevent battery contact with water and salt.
Laser precautions
CAUTION
To prevent eye damage and personal injury, do not look into the laser. Do not point
laser directly or indirectly (using reflective surfaces) at persons or animals.
