METREL EurotestXE, Instruction Manual

Page: 65 / 114

MI 3102(H) BT Eurotest XE Measurements
65
5.12
Current
This function is intended for measurement of load and leakage currents with current clamps.
One measuring input is available.
See chapter 4.2 Function selection for instructions on
key functionality.
Figure 5.50: Current menu
Connection for current measurement
Figure 5.51: Leakage and load current measurements
Current measurement procedure

Select CURRENT function from the OTHERS menu .

Connect current clamp to the instrument.

Connect the clamp to the item to be tested (see Figure 5.51 ).

Press the TEST key to start the continuous measurement.

Press the TEST key again to stop the measurement.

Store the result by pressing the MEM key (optional).
Figure 5.52: Examples of current measurement result
Displayed results for current measurement:
I ................ Current
Note:

For setup of current clamps see chapter 4.4.9 Clamp Settings .