METREL EurotestXD MI 3155 Instruction Manual Download Page 54

Page: 54 / 242

MI 3155

Eurotest

Instrument operation



Workspace / Export is deleted from the
Workspace / Export list.

4.8.8

Importing a Workspace



Select an Export file to be imported from
Workspace manager Export list.



Enters option Import.

Before the import of the selected Export
file the user is asked for confirmation.



The imported Export file is added to the list
of Workspaces.

Note:

If a Workspace with the same name
already exists the name of the imported
Workspace will be changed (name_001,
name_002, name_003, …).

Summary of Contents for EurotestXD MI 3155



















































































































































































































































Search results

Summary of Contents for EurotestXD MI 3155

Reviews:

Related manuals for EurotestXD MI 3155

Brands by name

Popular brands

METREL EurotestXD MI 3155, Instruction Manual

Search results

Summary of Contents for EurotestXD MI 3155

Reviews:

Related manuals for EurotestXD MI 3155

Brands by name

Popular brands