A 1632
eMobility Analyser
Maintenance
21
7
Maintenance
7.1 Periodic calibration
It is essential that all measuring instruments are regularly calibrated in order for the technical
specification listed in this manual to be guaranteed. We recommend an annual calibration.
7.2 Fuses
F1, F2, F3: F 5 A / 500 V / (32
6.3) mm (Breaking capacity: 50 kA)
Mains fuses intended for adapter protection.
Warnings!
Switch off the adapter and disconnect all test accessories and mains cord
before replacing the fuses.
Replace blown fuses with the same type as defined in this document.
7.3 Service
For repairs under or out of warranty please contact your distributor for further information.
Unauthorized person is not allowed to open the analyser. There are no user replaceable parts
inside the instrument.
7.4 Cleaning
Use a soft, slightly moistened cloth with soap water or alcohol to clean the surface of analyser.
Leave the instrument to dry totally before using it.
Notes:
Do not use liquids based on petrol or hydrocarbons!
Do not spill cleaning liquid over the instrument!
