A 1199
ρ
-Adapter
Safety and operational considerations
6
1.3 Standards applied
The
ρ
-Adapter is manufactured and tested according to the following regulations, listed
below.
Safety (LVD)
EN 61010 - 1
Safety requirements for electrical equipment for measurement,
control, and laboratory use – Part 1: General requirements
Electromagnetic compatibility (EMC)
EN 61326
Electrical equipment for measurement, control and laboratory use –
EMC requirements
Class B (Hand held equipment used in controlled EM environments)
Note about EN and IEC standards:
Text of this manual contains references to European standards. All standards of EN
6xxxx (e.g. EN 61010) series are equivalent to IEC standards with the same number
(e.g. IEC 61010) and differ only in amended parts required by European harmonization
procedure.
