7
REV. 12/2/21 INSTBC-HDR-K3
Yellow - Battery power
Black - Ground
Red - Accessory power
Orange - Illumination
Blue - Power antenna
Gray - Front right speaker (+)
Gray/Black - Front right speaker (-)
White - Front left speaker (+)
White/Black - Front left speaker (-)
Green - Rear Left speaker (+)
Green/Black - Rear Left speaker (-)
Purple - Rear Right speaker (+)
Purple/Black - Rear Right speaker (-)
Connect to LCD display
Front
Rear
Sub
AUX-IN
Rear View
SWC
Zip-tie Mounts
Inside Case
CAUTION:
If the fuse on the aftermarket radio
exceeds 10 amps, you MUST run a fused wire from
your vehicle’s battery to avoid potential damage.
Fuse
CONNECTIONS
3.5mm Adapter (for radios with a wire for SWC)
Boss (with SWC wire):
Key 1 (Gray) - Brown
Kenwood / JVC (with SWC wire):
Blue/Yellow - Brown
XITE:
SWC-2 - Brown
Universal Radio*:
Key-A or SWC-1 - Brown
Key-B or SWC-2 - Brown/White
* After programming, assign SWC buttons within radio menu
Vehicles without handlebar controls
1.
From the 3.5mm adapter, tie the
Brown
and
Brown/White
wires together and tape up or use a connector.
2.
Connect the 3.5mm adapter to the 3.5mm jack from the
vehicle harness.
3.
Program the interface per the instructions, page 8.
Summary of Contents for Saddle Tramp BC-HDR-K3
Page 11: ...11 REV 12 2 21 INSTBC HDR K3 ...