ATTENTION: With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
NOTE: Refer also to the instructions included
with the aftermarket radio.
The World’s best kits.
®
© COPYRIGHT 2021 METRA ELECTRONICS CORPORATION
REV. 12/2/21 INSTBC-HDR-K3
I N S TA L L AT I O N I N S T R U C T I O N S
BC-HDR-K3
KIT COMPONENTS
• A) Radio housing • B) Radio brackets • C) LCD screen • D) LCD back plate • E) #8 x 3/8" Phillips screws (6) • F) #10-32 1/2" Phillips steel machine screws (4)
KIT FEATURES
• ISO DIN radio provision
•
Saddle Tramp
interface with built in handlebar controls
• Water resistant enclosure for added protection
• Antenna adapter included
TOOLS REQUIRED FOR KIT INSTALLATION
• Panel removal tool • Phillips screwdriver
• Torx screwdrivers • Allen wrenches
WIRING & ANTENNA CONNECTIONS
(Included)
Wiring Harness: Saddle Tramp interface and
harness
Antenna Adapter
Handlebar Control interface
A
B
C
E
F
D
Harley-Davidson
Street Glide, Electra Glide,
Ultra, and Limited Models
2014-Up
†
Road Glide
2015-Up
†
†
Non-amplified models only
Visit
for more detailed information about the product and up-to-date vehicle
specific applications
TABLE OF CONTENTS
Fairing Disassembly
Harley Davidson Street Glide, Electra Glide,
Ultra, and Limited models 2014-up .............2-3
Harley Davidson Road Glide 2015-up..............4
Kit Assembly ..........................................................5
Saddle Tramp Interface Installation ................6-10
Summary of Contents for Saddle Tramp BC-HDR-K3
Page 11: ...11 REV 12 2 21 INSTBC HDR K3 ...
