Page 9
Door Access Terminal Combo User Manual
STEP 1:
Enter your locker’s number and confirm it by
pressing the
key.
STEP 2 A:
If there is no locker with the number you entered
or there is no reservation for this locker in the database
procedure is rejected, “NO” optical signal starts flashing
and interrupted acoustic signal is activated for 2 seconds.
Door remains locked.
STEP 2 B:
If there is a valid reservation in the database for
the locker you entered a “PIN CODE” optical signal starts
flashing accompanied with short acoustic signals.
Enter your 4 digit PIN code. By entering the last digit you
automatically confirm the PIN code.
NOTE
Only 4 digit PIN codes are supported by Metra software
user interface.
STEP 3 A:
If the PIN code is correct, “OK” optical signal
lights up and short acoustic signal is activated.
The door is unlocked.
STEP 3 B:
If the PIN code is rejected, “NO” optical signal
starts flashing and interrupted acoustic signal is activated
for 2 seconds.
Door remains locked.
