6
386.257.1187
|
BC-DSPL-HD2 INTERFACE ASSEMBLY
Cap (with O-ring)
Case
Saddle Tramp DSP
Circuit Board
BC-9715
Harness
16-Pin
20-Pin
Gasket
Zip-tie Mounts
Saddle Tramp WR Box Assembly 1
1.
Unsnap the
Cap
from the case. Insert the
overmolded gaskets from the
BC-9715
harness
into the respective opening in
the front of the
Cap
, making sure the
grommets are properly seated.
2.
Slide the
DSP board
out of the case and
plug in the
16
and
20 pin connectors
.
3.
Reinsert the
DSP board
into the case and
snap the
Cap
into place. The arrows on
the
Cap
should be pointed toward the
Saddle Tramp logo
on the case.
4.
Find a secure mounting location for
the
DSP case.
It is recommended that
the cap be installed facing down. The
Zip-tie Mounts
on each side of the case
can be used to secure the
DSP
into place.
