99-9107B
KIT ASSEMBLY
Snap the DDIN brackets to the
inside edge of the radio housing.
(Figure B)
2
Cut and remove center divider
from radio housing. (Figure A)
1
Snap the DDIN trim-plate onto the
housing/radio assembly. (Figure C)
4
Slide the DDIN radio unit into the
DDIN bracket/radio housing
assembly and secure the unit to
the kit using the screws supplied
with the head unit. (Figure C)
3
Snap radio assembly into factory
radio opening.
6
Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-con-
nect the negative battery terminal
and test the unit for proper opera-
tion.
5
DOUBLE DIN HEAD UNIT PROVISION
A
B
C
4
NOTE: Once the dash kit is snapped
in, it cannot be removed without
dash panel removal
Summary of Contents for 99-9107B
Page 7: ...5 NOTES 99 9107B...
