1.800.221.0932
|
6
4.
Secure the
radio brackets
to the radio
chassis using screws supplied with the
radio. Note the location of the bracket
on the radio and the screw slots to be
used. (Figures C,D)
5.
Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
6.
Slide the radio assembly into the dash,
then secure using the factory screws.
(Figure C)
(Figure D)
(Figure E)
(Figure F)
7.
Attach the
ISO DDIN radio trim panel
to the
trim panel housing
, then secure
using (4) Phillips screws provided
(Figure E)
8.
Secure the
trim panel housing clip
brackets
to the
trim panel housing
using (4) Phillips screws provided.
(Figure F)
9.
Attach (2)
panel clips
provided onto the
trim panel/housing assembly.
10.
Clip the trim panel/housing assembly to
the dash.
11.
Reassemble the dash in reverse
order of disassembly to complete the
installation.
