1.800.221.0932
|
6
KIT ASSEMBLY
(Figure A)
(Figure B)
(Figure C)
ISO DDIN radio provision
1.
Cut and remove the center bar from the
radio housing
. (Figure A)
2.
Attach the
ISO DDIN radio brackets
to
the inside edge of the
radio housing
.
(Figure B)
3.
Slide the radio into the bracket/radio
housing assembly, then secure the using
screws supplied with the radio.
(Figure C)
4.
Snap the
ISO DDIN trim plate
onto the
front of the
radio housing
.
(Figure C)
5.
Locate the factory wiring harness and
antenna connector in the dash. Metra
recommends using the proper mating
adapter from Metra or AXXESS. Test the
radio for proper operation.
6.
Reassemble the dash in reverse order of
disassembly to complete the installation.
