99-7365B
Kit Assembly
ISO DIN radio provision with pocket
1.
Mount the pocket to the radio
brackets with the four of the
#8 x 3/8” Phillips screws supplied.
(Figure A)
2.
Remove the metal “DIN” sleeve
and trim ring from the
aftermarket radio.
3.
Mount the bracket/pocket
assembly to the radio with the
screws supplied with the radio.
(Figure B)
4.
Snap the radio housing trim panel
into the factory trim bezel from the
back side of the bezel. (Figure C)
5.
Locate the factory wiring harness
and antenna plug in the dash and
make all necessary connections to
the new radio. Metra recommends
using the proper mating adapters
from Metra and/or AXXESS.
6.
After connecting all wiring, mount
the new radio assembly into the
dash with the factory screws and
reassemble the dash in reverse
order of disassembly.
3
(Figure A)
(Figure B)
(Figure C)
