background image

2

Dash Disassembly 99-7335S

1.

  Unclip and remove the side 

trim panels.

   

Tip: 

Start at the bottom of 

the panels.

  (Figure A)

2.

  Remove (6) Phillips head 

screws securing the radio 
trim panel and remove trim 
panel.  (Figure B)

3.

  Remove (4) Phillips screws 

securing the climate 
control, (2) Phillips screws 
securing the clock display 
and (4) Phillips screws 
securing the pocket from 
the radio trim panel.  
(Figure C)

 

Continue to kit preparation

Hyundai Veracruz Limited 2007-2012

(Figure A)

(Figure C)

(Figure B)

Dash Disassembly

–  Hyundai Veracruz Limited 2007-2012

(Automatic climate control only)

 ......................... 2

Kit Preparation

 ............................................... 3 

Kit Assembly

–  DIN radio provision with pocket .................... 3 
–  ISO radio provision with pocket .................... 4 
–  Double DIN radio provision ........................... 5 

Table of Contents

CLOCK DISPLAY-REAR VIEW

CLIMATE CONTROL-REAR VIEW

RADIO HOUSING
    REAR VIEW

POCKET-REAR VIEW

Pocket, rear view

Clock display, rear view

Radio housing,

rear view

Climate control

Summary of Contents for 99-7335S









Reviews: