1.
If vehicle has floor shifter, remove shifter knob.
2.
Unsnap and remove console front top cover (closest
to the dash). (Figure A)
3.
Remove two 8 mm screws from under console
cover (previously removed). Remove front section of
console. (Figure B)
4.
Loosen two 8 mm screws at bottom of dash.
Unsnap lower panel.
5.
Remove (2) Phillips screws facing up on front edge
of radio/climate control panel. (Figure C)
6.
Unclip and remove entire panel surrounding radio
and climate controls, including A/C vents. (Figure D)
7.
Remove (4) 7 mm screws securing radio to dash
and remove radio.
Continue to kit assembly
Dodge Ram 1500
(with full center console)
/
Ram 2500/3500 2006-2008
(Figure A)
1.
Unsnap and remove panel from around radio
including the vent on each side. (Figure A)
2.
Remove (4) 7 mm screws securing radio to dash
and remove radio. (Figure B)
Continue to kit assembly
Jeep Grand Cherokee
2005-2007
(Figure B)
(Figure D)
(Figure B)
(Figure C)
(Figure A)
Dash Disassembly 99-6510
