REV
. 11/14/2017 INST99-5828CH
INSTALLATION INSTRUCTIONS FOR PART 99-5828CH
METRA. The World’s best kits.
®
metraonline.com
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
K
NOWLEDGE IS
P
OWER
E
nhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
Controlling the Rear Air Conditioning:
1.
To turn on the rear a/c press the REAR power
button. The LED will begin to blink.
2.
While the LED is blinking you can adjust the fan
speed and temperature of the rear a/c with the
buttons on the control panel.
3.
If no buttons are pressed in 5-seconds the LED
will go solid and the controls will go back to
controlling the front a/c.
4.
To give the rear passengers control in the rear
press the REAR CTRL button once.
5.
Press the REAR CTRL button again to stop
rear control.
6.
At anytime you can press the REAR power
button and it will blink and the control
panel will control the rear fan speed and
temperature.
7.
To turn off the rear a/c off press the REAR
power button twice.
1.
Press and hold the bottom left hot key for
5-seconds until the a/c icon begins to blink.
2.
Press and hold the MAX button to increase Red.
3.
Press and hold the A/C button to decrease Red.
4.
Press and hold the Recirculation button to
increase Green.
5.
Press and hold the Mode button to decrease
Green.
6.
Press and hold the Rear Defrost button to
increase Blue.
7.
Press and hold the Front Defrost button to
decrease Blue.
8.
After you choose your color stop pressing the
buttons and after 10-seconds the color chosen
will stay and the display will stop blinking.
1.
Press the menu button to access
on-screen menu.
2.
Use the directional pad on the steering
wheel to scroll to “clock” in menu.
3.
Adjust clock settings.
Color Adjustment:
Clock Adjustments:
Red
Green
Blue
+
-
Press and hold 5-seconds to
enter LCD color change mode
For use with SYNC and
factory screen menus
