1.
Using a panel removal tool, carefully pry out on the
dash trim bezel and remove. (Figure A)
2.
Remove (2) screws securing the factory radio and
disconnect the wiring.
3.
Cut and remove all mounting tabs on Bracket #3
EXCEPT tabs “B”. (Figure B)
Note:
Identify mounting tabs by the stamped letter
on the back of each tab.
Chevrolet Cavalier
1991-1994
Chevrolet Cavalier 1995-1999
1.
Open drivers door and remove fuse panel on end of
dash then open passenger door and remove panel
on end of dash.
2.
Remove (1) Phillips screw from each side,
now exposed.
3.
Remove (3) 7mm hex-head screws
from the top of the glove box liner.
4.
Remove (2) 7mm hex-head screws
from the top-left corner of the glove
box cavity.
5.
Remove (1) Phillips screw from the defroster duct.
6.
Remove the duct work and (1) Phillips
screw exposed.
7.
Remove the dash pad and (3) Phillips screws
exposed at the top of the radio trim bezel.
(Figure A)
8.
Locate Bracket Set #10. (Figure B)
(Figure A)
(Figure B)
(Figure A)
(Figure B)
“B”
“B”
Dash Disassembly 99-4644
