6
Disconnect the negative battery terminal to prevent an
accidental short circuit. Open drivers door and unsnap
and remove dash end cap. Remove (2) phillips screws
from underneath steering column cover. Unsnap and
remove steering column cover. Unsnap and remove
instrument panel. Remove (2) 9/32" screws and remove
radio.
Disconnect the negative battery terminal to prevent an
accidental short circuit. Remove the plastic trim piece to
the left of the glove box and (1) phillips screw exposed.
Unsnap the top edge of the knee bolster panel. Remove
(1) phillips screw from the panel. Remove the ashtray
cluster and (2) phillips screws from each side. Unclip the
entire dash trim bezel and remove. Open doors and
unsnap end caps from each side of dash. Unsnap and
remove radio/instrument cluster panel. Remove (3)
screws in order to remove radio.
Disconnect the negative battery terminal to prevent an
accidental short circuit. Open drivers door and unsnap
and remove dash end cap. Remove (2) phillips screws
from underneath steering column cover. Unsnap and
remove steering column cover. Unsnap and remove
instrument panel. Remove (2) 9/32" screws and remove
radio.
Disconnect the negative battery terminal to prevent an
accidental short circuit. Unsnap the climate control trim
panel (from door to door) and remove (4) phillips screws
exposed. Pop out the a/c vents and remove (1) phillips
screw exposed in each vent cavity. Unclip the radio trim
bezel and remove. Remove the screws securing the factory
head unit and disconnect the wiring.
1
1
1
1
BUICK LeSabre 1995-2005
BUICK Century 1997-2005
BUICK Park Avenue 2000-2005
BUICK Park Avenue 1995-1999
1
Disconnect the negative battery terminal to prevent an
accidental short circuit. Remove screws in cup holder
Unsnap and remove shifter. Remove (2) screws from
bottom of radio/climate control bezel, unclip and remove.
Remove (3) 7mm hex head screws to remove radio.
Disconnect the negative battery terminal to prevent an
accidental short circuit. Remove the plastic trim piece to
the left of the glove box and (1) phillips screw exposed.
Unsnap the top edge of the knee bolster panel. Remove
(1) phillips screw from the panel. Remove the ashtray
cluster and (2) phillips screws from each side. Unclip the
entire dash trim bezel and remove.Open doors and
unsnap end caps from each side of dash. Unsnap and
remove radio/instrument cluster panel. Remove (3)
screws in order to remove radio.
Disconnect the negative battery terminal to prevent an
accidental short circuit. Unsnap and remove dash bezel.
Remove (3) 9/32" screws and remove radio.
1
BUICK Rendevous 2002-2007
BUICK Regal 1995-2000
CHEVROLET Cavalier 2000-2005
CHEVROLET Avalanche 2003-2006
Disconnect the negative battery terminal to prevent an
accidental short circuit. Open driver door and remove fuse
panel on the end of dash. Open passenger door and
remove panel on end of dash. Remove (1) phillips screw
from each side exposed. Remove (3) screws from top of
glove box liner. Remove (2) screws from the top-left corner
of the glove box cavity. Remove (1) phillips screw from the
defroster duct Remove the duct work and (1) phillips screw
exposed. Remove the dash pad and (3) phillips screws
exposed at the top of the radio trim bezel.
1
1
1
