2
99-3107 KIT AND FINAL ASSEMBLY
B
AUTO
A
C
DIN RADIO PROVISION WITH POCKET
Re-connect the negative battery ter-
minal and test the unit for proper
operation.
2
Mount the radio housing into the
radio opening in the sub dash using
the (2) black oval head Phillips
screws provided.
(Figure B)
3
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs outward.
(Figure C)
4
*
Note: Refer also to the instructions included with the aftermarket radio.
Locate the factory wiring harness in
the dash. Use the supplied wire har-
nesses and make the connections as
shown. (Isolate and individually tape
off the ends of any unused wires to
prevent electrical short circuit)
(Figure A)
1
Continued on page 3.
