99-3010S-LC
®
5
ISO DDIN radio provision
1.
Cut and remove the center support.
(Figure A)
2.
Snap the
ISO DDIN brackets
to the
inside edge of the
radio housing
.
(Figure B)
3.
Slide the radio into the bracket/
radio housing assembly and secure
it using the screws supplied with
the radio. (Figure C)
4.
Snap the
ISO DDIN trim plate
into
the
radio housing
. (Figure C)
5.
Continue to Axxess Interface
Installation, and once completed,
reassemble the dash in reverse
order of disassembly using the
99-3010S-LC
radio trim panel
instead of the factory panel.
Kit Assembly
(Figure B)
(Figure C)
(Figure A)
Axxess interface
Installation
• Wire cutter • Crimping tool • Tape • Solder gun
• Connectors (butt-connectors, bell caps, etc.)
TOOLS REQUIRED
• 3010S-LC interface • 3010S-LC harness
INTERFACE COMPONENTS
FEATURES
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Provides NAV outputs (parking brake, reverse, and speed sense)
• Used in non-amplified models
• Used in models without OnStar
• Retains all warning chimes
• High level speaker input
• Retains balance and fade
• Micro “B” USB updatable