Metra Electronics 95-8202, Installation Instructions Manual

Page: 3 / 20

3
Dash Disassembly 95-8202
1. Unclip and remove side panel from
both sides of radio and climate
controls. (Figure A)
2. Remove (4) Phillips screws
securing the radio/climate control
trim panel. (Figure B)
3. Remove (4) 10 mm bolts securing
the radio. (Figure C)
4.
Unplug and remove radio.
5.
Remove factory brackets from
radio. Retain brackets for use
during kit assembly.
Continue to kit assembly
Toyota Rav4 2001-2005
(Figure C)
1. Unsnap the lower trim piece from
each side of the dash console and
remove (2) Phillips screws exposed
in each cavity. Remove the upper
trim piece from each side of the
console. (Figure A)
2. Remove the climate control knobs
and (2) Phillips screws exposed.
Remove the climate control trim
bezel. (Figure A)
3. Remove the ashtray and (1) 10mm
bolt exposed. Unclip the ashtray
trim bezel and remove. (Figure A)
4. Unclip the radio trim bezel, remove
(4) Phillips screws securing the
unit and disconnect the wiring.
5. Remove factory brackets from
radio. Retain brackets for use
during kit assembly.
Continue to kit assembly
Toyota MR2 Spyder 2000-2003
(Figure A)
(Figure B)
(Figure A)