REV. 3/6/2019 INST95-7617B
3
KIT ASSEMBLY
1.
If equipped with automatic climate
controls, secure the climate module
removed in Dash Disassembly, to
the
radio brackets
, using the factory
hardware. (Figure A)
2.
Slide the radio into the completed
assembly, and then secure it using the
screws supplied with the radio. (Figure A)
3.
Locate the factory wiring harness and
antenna connector in the dash. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
4.
Place the
radio trim panel
over the radio
assembly, then reassemble the dash in
reverse order of disassembly.
(Figure A)
