background image

Dash Disassembly

-

Kia  Rio  2001    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

-

Sephia  1995-1997  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

-

Sephia  1998-2001  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

-

Spectra  2000-2001. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

-

Sportage  1998-2000  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

-

Sportage  2001-2003  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Kit Assembly

- Kit  Assembly  Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

- DDIN / Stacked ISO DIN Radio Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

TABLE OF CONTENTS

95-1003

*Note:
Refer also to the instructions included with the aftermarket radio.

Metra recommends MECP
certified technicians

K

NOWLEDGE IS 

P

OWER

E

nhance your installation and fabrication skills by

enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.

Summary of Contents for 95-1003













Reviews: