386.257.1187
|
4
KIT PREPARATION
From the factory radio & climate
control panel:
1.
Remove (2) T-8 Torx screws securing the
connector insert, then remove.
(Figure A)
2.
Remove (16) T-8 Torx screws securing
the back panel, then remove, exposing
the circuit board inside. (Figure B)
3.
Unplug the orange connector which
connects the two circuit boards together.
Remove (4) T-6 Torx screws securing the
lower and upper panels together, then
separate them. The upper panel will not
be reused. (Figure C)
Continued on the next page
(Figure B)
(Figure C)
(Figure A)
