REV. 10/21/2020 INST107-TO7HG
3
(Figure B)
(Figure C)
(Figure A)
KIT ASSEMBLY
(CONT.)
Pioneer Modular DDIN radio provision
Note:
For steps 1 and 2, reference the
installation manual provided with the radio
for which hardware to use. The display
screen and radio chassis use two different
types of screws.
1.
Secure the
radio brackets
to the radio
chassis using (4) screws supplied with
the radio. (Figure A)
2.
Slide the radio chassis into to the dash,
then secure using the factory screws.
3.
Secure the radio display to the
screen
brackets
using (6) screws supplied with
the radio. (Figure B)
4.
Place the
radio trim panel
into to the
factory dash panel, then the radio screen
assembly, and secure using the factory
screws. (Figure C)
5.
Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
6.
Connect the radio display to the
radio chassis.
7.
Reassemble the dash in reverse
order of disassembly to complete the
installation.
