1.800.221.0932
|
4
ISO DDIN radio provision
1.
Secure the
radio bracket
to the radio using
screws supplied with the radio. (Figure A)
Note:
Radio chassis screws must be flush.
Screws are provided if needed.
2.
Slide the radio bracket assembly into
the dash opening. The rear of the bracket
should go into the rear support slot in
the dash. (Figure B)
3.
Secure at the front with the factory
hardware. (Figure B)
4.
Clip the
back panel
over the radio.
(Figure C)
Continued on the next page
KIT ASSEMBLY
(Figure A)
(Figure B)
(Figure C)
