SH700 Installation.docx
Page 6 of 6
7/6/2017
Step 9 - Secure Top Cap -
Make sure all of the panels are even at the top into the cap and secure in
place with screws through the holes in the cap.
Step 10 - Accessories -
At this time, you can now install your accessories such as the soap dish, curtain
track, glides and shower curtain. If it is a handicap shower, you may also have grab bars and/or a seat to install
within the cabinet. A pipe chase cover may have been ordered to conceal any spaces between two or more showers
which were installed side-by-side.
Step 11 - Care & Maintenance -
For general care and maintenance, all surfaces must be kept clean
with water and a mild soap solution or equivalent cleaner free from alkali, acids or strong ingredients. Water left
on units for extended periods will damages the surface. The finish must be wiped dry following cleaning. Areas
with high humidity must be properly ventilated.
A clean terrazzo base is not slippery. The factors of a slippery surface are the same as those encountered on
any smooth surface, primarily surface films. A residual film of cleaning material is a common cause. Take extra
care to rinse all surfaces thoroughly.
A penetrating sealer has been applied to the terrazzo base. A surface sealer that has been specifically designed
for the terrazzo surface can be reapplied periodically.
Step 12 - Need Help? -
In the unlikely event that you need further help, you have several resources. First,
contact the Metpar representative from which you purchased the materials. They are best suited to assist you.
Another quick and easy source of information is the Metpar web site at Metpar.com. Here you will find a wealth
of information, details, specifications, technical support and so much more. Or, you can also contact us by email,
phone or fax.
Metpar Corp
95 State Street, Westbury, New York, USA, 11590 Tel: 516-333-2600 Fax: 516-333-2618
Internet: http://www.Metpar.com E-mail:
