Metos BETA BN 300, Installation And Operation Manual

Page: 10 / 16

19.7.2004 Rev. 2.0
Operation instructions
4
4. Operation instructions
4.1 Installation
Place the machine on a level and steady worktop which is bigger in surface than the ma-
chine. Always move the machine by lifting from the bottom. The machine should be fitted
in a place where it is easy to operate and maintain. The machine should also be installed
in a dry place, away from all heat sources. The machine must be connected only to a
earthed power supply, making sure that the voltage rating is in accordance with the rating
on the machine’s ID-plate. Turn on the machine by turning the control switch. Check that
the blade is rotating counterclockwise.
4.2 Operation procedures
Check that all safety devices function and the blade covering is on its place.
Place the product on the sled and the adjustable arm in place. Turn the slice thickness con-
trol knob (E) to the desired position. Turn on the machine. Push the sled from the handle
to guide the product towards the cutting blade.
After slicing turn off the machine by turning the control switch counterclockwise and the
slice thickness control knob in the 0 position.