17.05.2014
METOS CD
12
7. Troubleshooting
In case the appliance does not function as expected, review the following list of problems
to find out if the appliance can be put in order without a service call. In all enquiries,
please contact an authorized service company. Most problems can be managed on the
phone.
PROBLEM
POSSIBLE CAUSE
ACTION
The appliance does not start
even if the main switch is
turned on.
Electrical cable is not
properly plugged in the
socket.
Place the cable properly
in the socket.
Defective fuse.
Replace the fuse.
The compressor is run-
ning, but the temperature
does not fall to the set
value. The set value is
checked by pressing the
SET button.
Condenser is covered by
dust.
Contact the services for
cleamimg the condenser.
Prevented air circulation
beside the condenser.
Remove obstacles to en-
sure free air circulation.
Products placed in a way
preventing air circulation
inside the cupboard.
Arrange the products
so that air can circulate
freely.
Ambient temperature
exceeds the maximum
value (+25ºC, relative
humidity 60%)
Make sure that the appli-
ance has not been placed
close to a heat source. If
necessary, provide
mechanical ventilation.
The appliance does not contain parts that can be serviced by the user. Service must be carried
out by an authorised service company.
