01.09.2015
METOS MINOR 4/LD64
11
7. Installation
7.1. General
The installation of this appliance must be carried out in accordance with the manufacturer’s
instructions and following local regulations. This installation manual must be used
together with the installation drawing of the appliance.
The connection of the appliance to the electrical and water supply must be carried out by
qualified persons only.
7.2. Transporting and unpacking the range
The best way to move the range is to keep it in its package as long as possible while it also
protects the range from outer damage. If it is necessary to unpack the range, possible lifting
must be done from the bottom frame using suitable spacers of wood. In order to avoid
damages it is not allowed to use the cooking top as a workbench during installation.
7.3. Positioning the range
Because the temperature of a cooking plate accidentally forgotten on without a pan may
reach even 550°C, it is mandatory to follow local fire safety regulations when installing
the range.
The range is positioned in the installation place and adjusted in a horizontal position with
the help of the adjustable legs.
On ranges fitted with a convection oven the horizontal position should be checked from
the runners of the oven in order to achieve good browning results.
When the range is on the correct location and in a horizontal position, it must be bolted to
the floor, the land models by the flanges in the rear adjusting legs and the marine models
from all four leg flanges.
7.4. Electrical connections and Test run
The electrical connections can only be carried out by a qualified electrician having the necessary
competence for the installation and service of electrical appliances.
STOP
STOP
