10
2
Mx200 Software Setup
The following section will describe the basic setup parameters for configuring the Mx200. Not all setup
screen items will be addressed in this section. Additional setup screen settings and procedures will be
described in Section 4, “Additional Setup Screens”.
QUICK START: Follow the Green Ribbons through this document for the steps to Quick Start Basic
Setup of the Mx200 readout. While these steps can help quickly achieve initial machine setup, the
additional settings and features described below can always be configured alongside these basic
setup steps.
2.1
“Power On” the Mx200 readout.
Press the “Power Button” located in the bottom left corner of the Mx200 keypad.
Allow Mx200 boot sequence to complete. Once the Mx200’s main DRO view is displayed you can
continue with the setup procedure.
2.2
Navigating the Mx200 with Keypad and Touchscreen Controls
The Mx200 User Interface can be navigated by touchscreen control, by keypad button control, or a
combination of both. This dual input mode support applies to both the setup screen menu’s as well as
the main measuring modes of the readout
