METHVEN ROUND DRY RAIL Installation Manual Download Page 3

Page: 3 / 4

www.methven.com

Technical Specifications:

Operating Pressure:

Min: 35kPa/0.35bar

Max: 500kPa/5bar*

Optimum: 150kPa/1.5bar - 500kPa/5bar

Operating Temperature:

Hot: Max 70°C*

Cold: Min 5°C

Inlet Connections:

½" BSP

Operating Pressure:

Min: 150kPa/1.5bar

Max: 500kPa/5bar*

Optimum: 150kPa/1.5bar - 500kPa

Operating Temperature:

Hot: Max 70°C*

Cold: Min 5°C

Inlet Connections:

½" BSP

* Regional specific regulations apply.
Please refer to your warranty statement at

www.methven.com

HANDSET

Installation Guide

Summary of Contents for ROUND DRY RAIL

Page 1: ...rrants this product against manufacturing defects and that it is suitable for use under the general operating conditions specified in this instruction sheet However regional regulations apply and may...

Page 2: ...right Cut off the threaded nipple 13 2mm from the wall lining and apply thread seal tape to ensure a good seal Step 2 Screw the inlet connector onto the nipple Step 3 Slide the soap dish and bottom ra...

Page 3: ...g Temperature Hot Max 70 C Cold Min 5 C Inlet Connections BSP Operating Pressure Min 150kPa 1 5bar Max 500kPa 5bar Optimum 150kPa 1 5bar 500kPa Operating Temperature Hot Max 70 C Cold Min 5 C Inlet Co...

Page 4: ...It is the responsibility of the installer to ensure a waterproof seal is achieved NOTE Some showers may not provide an effective shower when used with gravity fed heated water systems or where pressur...