IMPORTANT
Please read all of the instructions before installation
This mixer is designed for equal and unequal pressure systems.
All pipework must be thoroughly flushed prior to the installation of the mixer. In-line filters
must be fitted on both hot and cold supplies to prevent foreign particles damaging the ceramic
cartridge.
Equal Low Pressure and Unequal
Pressure Installations
Remove flow restricted (yellow) stream
shaper using cache key.
Replace with un-restricted (white) stream
shaper
Unequal pressure installations
Install flow restricted brass nipple on cold
inlet
Stream shaper
Col
d
CORRECT
Max 40mm
ø35mm Min
ø38mm Max
Cold
Hot
INCORRECT
DO NOT CRUSH
HOSE OR SWAGED
ENDS
DO NOT STRETCH OR TWIST HOSE
Clamp Plate
O-Ring
Twin Stud
Fixing system
Mounting nuts
Flexible inlet hose:
cold
hot
R35mm Min
20mm